Design an Ozone Generator by Using Dielectric Barrier Discharge
Keywords:
ozone, Dielectric Barrier Discharge DBD, oxygen, non-Thermal plasma
Abstract
An Ozone generator was designed according to dielectric barrier discharge (DBD) technique with Oxygen as a feed gas for Ozone generating. The effect of the flow rate on the concentration of the Ozone was studied, the flow rate was varied from 0.6 to 5lit/ min for two values of the gap space between electrodes d= 2 and 4 mm, and two values of the electrode area A= 20 and 36 cm2. Also, the effect of the applied voltage on the concentration of the Ozone was studied, the applied voltage was varied from (1- 9 kV) for the same gap space and electrode area values. It is found that the concentration of Ozone produced increases with increasing voltage, and decreases with increasing flow rate.
Published
2018-07-03
How to Cite
Al-Jobouri, H. H., & Ismaeel, H. O. (2018). Design an Ozone Generator by Using Dielectric Barrier Discharge. Al-Nahrain Journal of Science, 17(1), 89-94. Retrieved from https://anjs.edu.iq/index.php/anjs/article/view/484
Section
Articles
Statement of the Agreement This is an agreement under which all authors(represented by the corresponding author)of the article grant license to publish your article (titled in this document)including abstract, data, tables and figures and their explanation and the supplemental materials (if provided) in Al-Nahrain Journal of Science. This agreement is valid for the full period of copyright throughout the world and the right to publication is granted in all forms, formats and in all media of this time and in the future. This agreement includes that all the authors comply with the Journal’s policies on peer-review and publishing ethics. This agreement must be read, understood and agreed to the terms and conditions of this agreement.
.jpg)
