New Ion Selective Electrodes for Analysis of Metformin Based on Molecularly Imprinted Polymers

Authors

  • Nabeel Mohammed Department of Biology, College of Education for Women, University of Kirkuk, Kirkuk, Iraq
  • Yehya Al-Bayati Department of Chemistry, College of Science, University of Baghdad, Al-Jaderia, Baghdad, Iraq

Keywords:

Molecularly imprinted electrodes, Metformin, Potentiometric method, Glycidyl methacrylate, Allyl methacrylate monomers

Abstract

Metformin (MEF) imprinted polymer liquid electrodes are created using a precipitation polymerization process. The MEF served as a template for the creation of molecularly imprinted (MIP) materials using benzoyl peroxide (BPO) as an initiator, allyl methacrylate (AMA) crosslinkers, and glycidyl methacrylate (GMA) as a monomer. Utilizing Di-octyl-phthalate (DOPH) and di-butyl phthalate (DBPH) as plasticizers in a PVC matrix, the molecularly imprinted membranes are created. The reaction time is approximately 50 seconds, and the limits of detection for liquid electrodes, as determined by the calibration curves, are 55.6 to 58.4 mV/decade at 5×10-5 M and 8×10-5 M respectively. The liquid electrodes demonstrated good selectivity over a variety of species and a consistent reaction when filled with a typical 0.1 M drug solution across the pH range of 1 to 11. Modern electrodes can detect MEF without the need for time-consuming pre-treatment procedures in pharmaceutical samples.

References

Wulff, G.; "Molecular Imprinting in Cross-Linked Materials with the Aid of Molecular Templates a Way Towards Artificial Antibodies". Angew. Chem. Int. Ed. Engl., 34: 1812–1832, 1995.

Jiang, X.; Jiang, N.; Zhang, H.; Liu, M.; "Small Organic Molecular Imprinted Materials: Their Preparation and Application". Anal. Bioanl. Chem, 389: 355–368, 2007.

Mayes, A.G.; Whitcombe, M.J.; "Synthetic Strategies for the Generation of Molecularly Imprinted Organic Polymers". Adv. Drug Del. Rev., 571: 1742–1778, 2005.

Spivak, D.A.; "Optimization, Evaluation and Characterization of Molecularly Imprinted Polymers". Adv. Drug Del. Rev., 57: 1779–1794, 2005.

Mayes, A.G.; "A Brief History of the ―New Era of Molecular Imprinting in Molecularly Imprinted Materials". Eds.; Marcel Dekker: New York, USA: pp. 13–24. 2005.

Al-Bayati, Y.K.; "Preparation of Selective Sensors for Cyproheptadine Hydrochloride based on Molecularly Imprinted Polymer used N, N-Diethylaminoethyl Methacrylate as Functional Monomer". Eurasian J. Anal. Chem., 13(5): 2-11, 2018.

Rena D.G.; Grahame H.; Ewan R.; "The mechanisms of action of metformin". Diabetologia, 60: 1577-1585. 2017.

Ismaeel, S.A.; Al-Bayati, Y.K.; "Determination of Trace Metformin in Pharmaceutical Preparation Using Molecularly Imprinted Polymer Based Pvc-Membrane". Eurasian Chem. Comm., 3: 812-830, 2022.

Sha’at, M.; Florin, S.A.; Stoleriu, I.; Bujor, A.; Stamate, C.M.; Hartan, M.; Ochiuz, L.; "Implementation of Qbd Approach to the Analytical Method Development and Validation for the Estimation of Metformin-Hydrochloride in Tablet Dosage Forms by HPLC". Pharmaceutics, 14 : 2-22, 2022.

Hee, L.Y.H.; Sang, S.S.; "Determination of N-nitrosodimethylamine and N-nitrosomethylethylamine in Drug Substances and Products of Sartans, Metformin and Ranitidine by Precipitation and Solid Phase Extraction and Gas Chromatography–Tandem Mass Spectrometry". J. Pharm. Biomed. Anal., 189: 45-51, 2020.

Hattab, A.; Ahmed, A.; Anwar, S.A.; “Spectrophotometric Determination of Phenylephrine Hydrochloride in Pharmaceutical Preparations by Oxidative Coupling Reaction”. Int. J. Drug Del. Tech., 10(03): 323-327, 2020.

Ismaeel, S.A.; Al-Bayati, Y.K.; “Determination of Trace Metformin in Pharmaceutical Preparation Using Molecularly Imprinted Polymer Based Pvc-Membrane". Eurasian Chem. Comm., 3: 812-830, 2021.

Esra, Y.N.; Dildar, K.; “A Typic Separator Gel Flotation in Blood Collection Tube in a Patient with Hyperproteinemia". Int. J .Med. Biochem., 3: 186-188, 2020.

Huang, Y.-J.; Chang, R.; Zhu, Q.-J.; "Synthesis and Characterization of a Molecularly Imprinted Polymer of Spermidine and the Exploration of its molecular recognition properties". Polymers, 10: 1389-99, 2018.

Al-Safi, A.J.; Al-Bayati, Y.K.; "Synthesis and Characterization of Molecularly Imprinted Polymer for Tramadol Hcl Using Acryl Amide and 2-Hydroxyethyl Meth Acrylate as Monomers". Cur. Iss. Pharma. Med. Sci., 31: 81-88, 2018.

Hee, L.Y.; SangShin, S.; "Determination of N-Nitrosodimethylamine and N-Nitrosomethylethylamine in Drug Substances and Products of Sartans, Metformin and Ranitidine by Precipitation and Solid Phase Extraction and Gas Chromatography–Tandem Mass Spectrometry". J. Pharm. Biomed. Anal., 189: 113-460, 2020.

Ahmed, A.; Hanoon, I.T.; Ahmed, S.H.; “Determination of the Ciprofloxacin Hydrochloride Drug in Some Pharmaceuticals using Manufactured Membrane Selective Electrodes”. Sys. Rev. Pharm.; 11(6): 622-626Y, 2020.

Downloads

Published

2024-02-01

Issue

Section

Articles

How to Cite

(1)
New Ion Selective Electrodes for Analysis of Metformin Based on Molecularly Imprinted Polymers. ANJS 2024, 26 (4), 41-47.